Skip to the page

How much does a plumber cost? Job prices and ways to pay less

Published guides put most plumbers at $75 to $150 an hour, with a possible service call fee of $50 to $300, and common jobs from about $100 for a drain to $800 for a toilet install. Here is how to keep the bill reasonable.

Last changed

Get my quote

Comparison of job and visit factors that move a plumber price

Plumbers typically charge $75 to $150 an hour, and many add a service call fee of $50 to $300 that covers the trip and the diagnosis. One published guide puts the typical plumbing job total at $180 to $489, with a national average of $331. These are national published figures and a guide only, since the plumber quotes the real price. This page is the overview; the Stockton Plumbing Hub home page links every service and area.

How expensive is plumbing work?

Plumbing work ranges from a few hundred dollars for a repair to many thousands for whole-house work. The hourly rate is only part of it. The job, the fixtures, the access and the time of day shape the final price, so a quote for the whole job is more useful than a rate alone.

JobPublished price (guide only)
Typical plumbing job total$180 to $489
Toilet installation$400 to $800
Sink installation$400 to $1,000
Unclogging a drain$100 to $500
Water heater installation$800 to $2,500
Whole-house plumbing$4,000 to $12,000

Where a job has its own page, the details are there: water heater cost, hydro jetting cost and plumbing cost per fixture.

What do plumbers charge per hour and for a service call?

Typical plumber rates are $75 to $150 an hour, with a wider published span of $45 to $200. Journeyman plumbers sit lower, around $45 to $90, and master plumbers higher, around $70 to $200. A service call fee of $50 to $300 (another guide says $100 to $350) often covers diagnosis, and some businesses credit it if you approve the repair.

Bar chart of typical plumber price ranges

Our page on the plumber hourly rate goes deeper on how rates are built. A short job is often priced as a flat rate or a minimum charge, so a quick fix may cost more than the hourly rate suggests. Ask what the minimum is before the visit.

How much does a plumber cost for 3 hours?

At the typical $75 to $150 an hour, three hours of labor is about $225 to $450, before parts and any service call fee. A master plumber or an after-hours visit can push that higher. Parts, permits and disposal are usually extra, so the total will be higher.

That total is a rough guide drawn from the published hourly range, not a published job price. A plumber who quotes a flat price for the whole job gives you a number to hold them to, whereas an hourly quote can run over. Ask whether the quote is a flat price or an estimate, and what happens if the job takes longer.

How do you find an affordable plumber without cutting corners?

The cheapest price is not always the lowest cost. Get two or three written quotes for the same described job, avoid after-hours calls when the problem can wait, and have the area cleared so no time is lost. Lower bids that skip the permit, the cleanup or a written scope can cost more once extras appear.

Practical ways to keep the bill down:

  • Bundle small jobs. If you have a dripping faucet and a slow drain, one visit means one service call fee.
  • Schedule in normal hours. After-hours work is often priced at time-and-a-half to triple the standard rate. See emergency plumber cost.
  • Buy the fixture yourself when allowed. The plumber may still need to supply parts, and warranties can differ, so ask first.
  • Describe the problem accurately. A clear description helps the plumber bring the right parts, which avoids a second trip.

What affects what a plumber charges?

Plumber grade, job complexity, local rates, time of day, pipe material and access all affect the price. Permits and inspections, hidden problems such as a leak under a floor, and finish work like drywall repair add more. Hiring through a general contractor adds that business's markup on top.

Location matters too. We found no published price table for Stockton itself, so these are national ranges. Rates in your area may sit above or below them, which is why two or three local quotes beat any online figure. In California, a contractor must hold a license when a project needs a permit or reaches $1,000 in labor and materials, so larger plumbing work needs a plumbing contractor who holds a California license. Check any contractor at cslb.ca.gov.

If you are not sure what a visit normally includes, the guide to what a plumber service covers lists the usual scope and what is billed separately.

Questions people ask

How much does plumbing cost for a mobile home?

We found no published price table for mobile home plumbing, so we give no figure. The same hourly rates apply, and the cost depends on access, pipe material and whether the work is under the home. Ask the plumber if they are used to mobile home layouts and request a written quote for the specific job.

Is it worth paying more for a plumber who can come the same day?

Sometimes. Same-day or after-hours service is usually priced higher, so it makes sense for an active leak, a sewage backup or no water. For a dripping tap or a slow drain, booking in normal hours is usually cheaper. Our 24 hour plumber page explains when speed is worth the extra.

Can I ask a plumber for a fixed price?

Yes. Many plumbers give a flat price for common jobs once they see the work. Ask for it in writing and for what it includes. In California, a home improvement contract over $500 should be in writing, list the license number and cap the down payment at $1,000 or 10% of the price, whichever is less.

How can I get quotes from local plumbers?

Describe the job, the fixtures involved and when you need it done on our price request page. A local plumbing business will get back to you with a quote, and you can compare what each includes before you decide.

Sources

Last changed