Replacing a toilet averages about $450 nationally in Fixr's guide, with a typical range of $250 to $800 including the toilet. Labor alone is published at $150 to $440, and Bob Vila lists $224 to $532 for the whole job. We found no published national price for a handyman install, so ask for a written quote. The right choice depends on the job: a straight swap suits either, while a leak, a damaged floor or a moved drain needs a plumber. See our page on toilet repair and replacement for the work itself. These figures are a guide only.
How much does it cost to install a toilet?
A typical toilet installation costs $250 to $800 including the fixture, with labor alone at $150 to $440. Removing and hauling away the old toilet, if billed separately, adds $50 to $200 (Bob Vila). The price you pay depends mainly on the type of toilet, because a basic two-piece costs a fraction of a wall-mounted or smart model.
| Toilet type | Published unit price (guide only) |
|---|---|
| Two-piece | $90 to $875 |
| One-piece | $150 to $1,500 |
| Wall-hung | $500 to $2,000 or more |
| Smart | $1,200 to $13,000 or more |
Budget models keep the fixture cost down, while premium and wall-hung models push the total up. Bob Vila adds that unexpected problems can add up to $800 in labor.
What does a handyman charge to install a toilet?
A handyman may install a toilet you supply, which usually covers removing the old one, fitting a new wax ring, setting and bolting the toilet down, connecting the water supply and checking for leaks. Fixr says most handymen can handle a replacement when the new toilet matches the old one in style and size. We found no published handyman price, so ask for a flat quote.
Check what is on the quote. A handyman may charge a trip fee, and an offset waste line or a rotted floor can raise the cost. If something unexpected shows up, a plumber may need to finish the job.
What does a plumber charge to install or replace a toilet?
A plumber typically charges $75 to $150 an hour, and toilet installation labor is published at $150 to $440 in total (Fixr). A plumber also repairs the plumbing underneath, such as a damaged flange, a bad shutoff valve or a leaking supply line. Our page on a burst toilet supply line covers what that repair involves.
For a straightforward swap, the difference between handyman and plumber labor may be small. The plumber's advantage is scope. Plumbing technicians can deal with a slow drain, a leak at the base or a wobbling toilet in the same visit.
Can a handyman legally install a toilet in California?
California lets an unlicensed handyman take a job only if the total labor and materials come to less than $1,000, no building permit is needed and no employees are used. A basic toilet swap often fits that rule. Work that needs a permit or reaches $1,000 or more must go to a contractor who holds a license.
The plumbing business that visits through this site holds its own license, and you can check any contractor at cslb.ca.gov. A handyman is not a plumbing contractor. If the job grows, for example a drain relocation or a pipe repair that pushes the total past $1,000, a licensed plumbing contractor is required. Ask any handyman up front what they will do if the job turns out bigger.
How much does it cost to repair a toilet?
Bob Vila puts the average toilet repair at $100 to $250. A running toilet is the most common case, and the cost depends on which part failed. If your toilet keeps running, read how to repair a running toilet and repairing a toilet fill valve first, since a part costing a few dollars can fix it. A leak at the base is a different problem, covered under a plumber for a toilet leak.
What do home improvement stores charge to install a toilet?
We found no published figure for what a specific home improvement store charges, so we give none. Stores often arrange an outside installer, and the price depends on the toilet and your home. Ask for the install price in writing, and what it covers: haul-away, wax ring, supply line and any repair if the flange is damaged.
Compare that against a local handyman and a local plumber for the same job. The cheapest option for a clean swap is often a handyman, while a plumber makes sense when anything about the plumbing is in doubt. Our general guide to plumber cost covers what plumbers charge across other jobs.