Skip to the page

Plumbing cost per fixture in Stockton

Plumbing is priced fixture by fixture, and the cost depends on whether the lines already exist. Here are the published ranges for new rough-in and for replacing a faucet, sink, toilet or shower.

Last changed

Get my quote

Bar chart of per-fixture plumbing price ranges

New rough-in plumbing for a kitchen, bathroom or laundry room is published at about $450 to $650 per fixture, before the fixtures themselves. Replacing a fixture where the lines already exist costs less, usually about $150 to $1,000 depending on whether it is a faucet, a sink or a toilet. A plumber's quote for your job sets the real price.

This guide covers the cost of plumbing by fixture, from a faucet to a shower. If you are fixing or swapping fixtures, the faucets, sinks and showers page explains the work, and the rest of this page is about price.

How much does rough-in plumbing cost per fixture?

Rough-in plumbing, the supply and drain lines that run to where a fixture will go, costs about $450 to $650 per fixture or faucet in Fixr's plumbing guide. That covers kitchens, bathrooms and laundry rooms but leaves out the fixture itself and finish work.

ItemTypical rangeNote
Rough-in, per fixture$450 to $650Kitchen, bathroom or laundry
Moving a bathroom fixture more than 3 feet$450 to $1,200 per fixtureExisting home
Plumbing for a bathroom remodel$2,000 to $10,000Whole room

What does it cost to replace a faucet, sink or toilet?

Replacement costs run lower than rough-in because the lines already exist. A kitchen faucet is about $150 to $400, a sink with its plumbing $400 to $1,000, and a toilet $250 to $800. The ranges are wide because unit price and access vary.

For a kitchen faucet specifically, Fixr gives $150 to $400 installed with an average of $300, and Bob Vila gives $161 to $364 with an average near $260. The faucet itself ranges from about $70 to $900 in Bob Vila's guide, and Fixr notes a budget faucet can be $75 in materials while luxury models top $600.

What does a shower cost per fixture?

A shower is the priciest standard fixture. A shower is a bigger job than a faucet or toilet, and we found no per-fixture price we could trust for one, so we give none. These are bigger jobs because a shower needs three lines and the surrounding work adds to the labor.

For repairs, the numbers are much smaller. A leaking showerhead or a worn cartridge is a small repair, and the same page covers what a visit involves. If it is a leak you are chasing, the repair leaking faucet page helps you decide between fixing and replacing.

What pushes the price per fixture up or down?

Plumbing cost per fixture rises when lines must move, when the work is in a concrete slab or an upstairs room, and when fixtures are premium. It falls when you replace like for like at the same spot and choose a standard fixture.

  • Moving the fixture. Moving a sink sideways along a countertop adds about $150 to $300, and moving it to a kitchen island adds $500 or more, according to Fixr.
  • Slab versus crawlspace. A line run through concrete costs more to move, which matters for slab homes.
  • Pipe material. PEX is usually cheaper than copper.
  • Fixture type and brand. A budget faucet can be $75 in materials and a luxury one can pass $600.
  • Demolition and access. Opening walls or floors adds labor outside the plumbing itself.
  • Permits and code. Local building rules can add steps, and new rough-in work may need a permit, so ask whether the quote includes it.

What does bathroom or kitchen plumbing cost per room?

Per room, Fixr puts plumbing for a bathroom remodel at $2,000 to $10,000. Kitchen plumbing costs less when the sink stays where it is.

If you are adding fixtures to an existing home, the number of new lines and the distance to the main stack decide most of the bill. See the garbage disposal cost page for one common kitchen add-on, and the plumber cost overview for general ranges across common jobs.

How to compare per-fixture quotes

Compare quotes on the same scope. Ask whether each quote is rough-in only or includes setting the fixture, who supplies the fixture, whether the price includes a permit and whether finish work such as patching drywall is yours or the plumber's.

Ask for the number of fixtures and lines written out, so you can compare line by line. A lower per-fixture price that leaves out the permit or the fixture itself is not lower. For hourly details behind these quotes, see the plumber hourly cost page.

Questions people ask

How much does it cost to replace a kitchen faucet?

Fixr puts it at about $150 to $400, with an average near $300, and Bob Vila gives $161 to $364. A replacement in the same spot often takes under an hour, and costs rise if the sink must be moved or the faucet is a premium model.

What is rough-in plumbing?

Rough-in is the supply and drain piping installed before walls are closed up, so each fixture has water and a drain where it will go. It is separate from setting the fixture. In new construction or a remodel, a plumber does rough-in first and returns to finish after the walls are done.

Is the price per fixture the same for every fixture?

No. A toilet needs two connections, a sink three lines and a shower three lines plus a drain and valve, so the work differs. Published per-fixture figures are averages across these. A single quote should list each fixture separately so you can see where the money goes.

Can I cut the cost by supplying my own fixtures?

Often, yes, since the plumber then bills only labor. But some plumbers prefer to supply the fixture, and the wrong model can cause delays. Ask before buying, and check that the faucet or fixture fits your sink holes and supply lines.

Do I need to be home while a plumber works on a fixture?

Someone needs to give access and be reachable. For a faucet or sink swap, plan on clearing the cabinet under the sink first. For rough-in or a shower, the job may span days, so agree on access and who handles the water shutoff before it starts.

Sources

Last changed