A slab leak repair typically costs $630 to $4,400 nationally, with an average near $2,300 (This Old House); another guide gives $1,000 to $4,000 and a $2,500 average (Fixr). The price climbs sharply if the plumber has to break through the concrete or reroute the line. A burst pipe in an open wall is much cheaper, often $200 to $1,000. If you are dealing with leaks, burst pipes or repiping, our page on leaks, burst pipes and repiping covers the work itself. This page covers the money, and the figures are a guide only because the plumber quotes the real price.
How much does slab leak repair cost?
Published guides put slab leak repair at $630 to $4,400 with a $2,300 average in one guide, and $1,000 to $4,000 with a $2,500 average in another. The second guide reports extremes from $600 to $15,000. The method the plumber uses decides where in that range you land. Spot repair through the slab costs less than rerouting the line around it.
| Slab leak step or method | Published price (guide only) |
|---|---|
| Leak detection | $100 to $400 (Fixr); $150 to $600 (This Old House) |
| Sealing the leak | $100 to $200 |
| Broken pipe repair | $200 to $2,000 |
| Patching the pipe | $250 to $800 |
| Tunneling under the house to reach the pipe | $900 to $2,000 |
| Breaking through the slab | $500 to $3,000 |
| Pipe lining (priced by length) | $500 to $2,000 |
| Rerouting the line above the slab | $4,000 to $15,000 (Fixr); $1,500 to $15,000 (This Old House) |
Several of these stack on one job. Detection comes first, then one repair method. If the plumber finds more than one weak spot in old water lines, rerouting or repiping often becomes the sensible choice even though it costs more up front.
What drives the cost of a slab leak repair?
Where the leak sits, how thick the slab is, what the soil is like and what pipe has failed set most of the price. A leak under a bathroom with a tile floor costs more to reach than one near an exterior wall. Rerouting takes longer than a spot repair.
- Leak size and location. An easy-to-reach spot means less demolition.
- How much flooring or slab is removed. Tile, hardwood and cabinets raise the repair and rebuild cost.
- Number of problems. Many pinholes in the same pipe point to repiping rather than patching.
- Labor rates. Plumbers are published at $45 to $200 an hour, most between $75 and $150.
- Water damage. Drying, flooring and mold work after a leak can cost more than the plumbing itself. We found no published figure we could verify. Check your homeowner's policy: coverage for sudden water damage is common, while the cost of fixing the leaking pipe often is not covered.
How much does a leaky pipe cost to fix?
A plumber often charges for a leak-finding visit first, and one guide puts slab leak detection at $100 to $400. A broken pipe repair is published at $200 to $2,000 in the slab leak guides, and the burst pipe guide below gives a narrower typical range. If drywall has to be opened, patching adds to the cost.
A pipe in a wall is priced like other burst pipes, before the damage to the wall itself. Leaks in a ceiling are priced like wall leaks, but the plumber must also find where the water travelled, which can add time. Our page on a plumber for a water leak explains how a leak is found and what the visit involves.
How much do burst pipes cost to fix?
Burst pipe repair typically costs $200 to $1,000, with an average near $500. A burst main water line is published at $400 to $2,000 and a burst sewer line at $1,500 to $3,000. Water damage cleanup is separate and not included.
If a pipe has burst right now, shutting off the main water valve limits the damage while you wait. For the plumber's role and when to call, see burst pipe plumber. Evening or weekend calls cost more, which our emergency plumber cost page explains.
How much does it cost to repipe a house?
One guide lists whole-house plumbing at $4,000 to $12,000, and replacing the plumbing under a slab, usually by rerouting through the attic, at $4,000 to $15,000 in another. The final number depends on pipe material, the number of bathrooms and how much wall has to be opened.
Drywall repair, permits and painting add to the bill. A repipe is major work, and California requires a licensed contractor when a job needs a permit or totals $1,000 or more.
What is the cheapest way to repipe a house?
The cheapest route is usually to replace only the failing section, use a flexible material such as PEX where code allows, and pick a plumber who can reach the pipes without opening much wall. Lining a pipe, published at $500 to $2,000, can avoid a full repipe if the pipe is otherwise sound. It does not suit every pipe.
Ask the plumber to price three options side by side: spot repair, lining where suitable, and full repipe. A low quote that leaves old pipe in place can cost more later if it fails in a new spot. Compare what each option covers and how long each is expected to last, then choose the one that fits the condition of your water lines and your plans for the house.
